scaling.

If you would like to see a feature implemented in HighDesign please post your suggestions and requests here.
Post Reply
User avatar
Beagle
Posts: 73
Joined: Mon Oct 10, 2005 11:54 am
Location: Belgium

scaling.

Post by Beagle »

The posibility to have or to have the posibilty to chooce other scaling factors like
2:1 or 5:1 or 10:1

cad. a bigger drawing for very small and little objects.
Ship modelling is not a hobby, it has become a way of live. © Brian King.
Als je ouder wordt, wordt alles slechter, behalve het vergeten, dat wordt steeds beter ..

User avatar
Andrew
Site Admin
Posts: 634
Joined: Thu Apr 29, 2004 2:16 pm
Location: Ilexsoft HQ
Contact:

Post by Andrew »

You can do that now in 1.5: in the Drawing Scale dialog, type a decimal value between 0 and 1. For example:

2:1 is 1:0.5
5:1 is 1:0.2
10:1 is 1:0.1

Such values are just not displayed in the pop-up menu as they aren't commonly used, but are perfectly allowed.
Andrea Suraci
ILEXSOFT - Look Ahead
https://www.ilexsoft.com

User avatar
Beagle
Posts: 73
Joined: Mon Oct 10, 2005 11:54 am
Location: Belgium

Post by Beagle »

sorry that I read this at a late date. I was to busy on a restauration job.
anyway thanks for the tip.
Ship modelling is not a hobby, it has become a way of live. © Brian King.
Als je ouder wordt, wordt alles slechter, behalve het vergeten, dat wordt steeds beter ..

Post Reply