Working with layers -

General HighDesign Discussions
Post Reply
musiclc
Posts: 1
Joined: Wed Apr 27, 2005 7:57 pm

Working with layers -

Post by musiclc »

Is there something I am missing? (I started on this project with 1.4x and now am using 1.5fc1). I would like to copy the walls from the default HighDesign layer to the Walls layer, and then continue drawing with "drawing tools auto to layers" activated, so that newly drawn walls will go to the Walls layer.

1. HD doesn't seem remember the "bind drawing tools to layers" option after quitting and reopening the same document.

2. I tried copying from the High Design layer, then locking and making hidden every other layer, then pasting into the Walls layer. But it always pastes back into the High Design layer, even though it is locked/hidden and even though the Walls layer was active.

Am I doing something wrong here? Thanks!

User avatar
Andrew
Site Admin
Posts: 634
Joined: Thu Apr 29, 2004 2:16 pm
Location: Ilexsoft HQ
Contact:

Post by Andrew »

The reply to this topic was given privately because it was about a pre-release version, which is our policy not to discuss in public (not too much at least :) )

All the issues mentioned here have been addressed in the final 1.5 release.

Post Reply